1. Home
  2. Case studies
  3. Eni | John Agyekum K ...

John Agyekum Kufuor FPSO

| OCTP Block, Offshore Ghana | Eni | FPSO (spread moored)

Project background

The JAK FPSO is located 60 km offshore Ghana in the Offshore Cape Three Points area. The FPSO has an oil production capacity of 58,000 bopd alongside water and gas injection capabilities of 150 mmscfd while the maximum future gas export capacity is 210 mmscfd. It has a design life of 20 years without dry docking and can be moored in an average water depth of 1,000m with a total topside weight of almost 15,000 tonnes.

Scope of supply

PJ Valves manufactured bulk valve requirements for the two main topside EPC contractors, including multiple process modules: oil separation, LP/MP compression module, gas injection module and the sea water treatment module. The scope included water injection ball valves up to 12” 2500# fabricated at our facility along with a package of other valves in materials such as Ni Al Br, CS, duplex and stainless steel.
  • Trunnion Mounted ball valves
  • Double block and bleed valves
  • Butterfly valves
  • Floating ball valves
  • Gate, globe and check valves

Outcome

We worked with our clients to meet end user specifications which were in a continuous state of development, whilst also highlighting several approved deviations that resulted in improvements to cost and delivery schedule. Full commissioning support in the fabrication yards in Batam along with the main shipyard in Singapore.

Customer first

“PJ Valves subsequently won the bulk of valves required for two follow on projects.”

Relevant products

Mooring applications call for a diverse range of products with common features in specification and configuration.

High pressures, metal seating and corrosion resistant alloy materials are typical requirements.
VIEW ALL PRODUCTS

Would you like more information?

Congratulations. Your message has been sent successfully.
Error, please retry. Your message has not been sent.

Three ways for suppliers to positively support the oil and gas industry through transition

By Dan Munro, Owner of PJ Valves We can do this. We can help the oil and gas industry respond to current pressures by emerging as more efficient and less environmentally damaging. There is going to be blood on the carpet during the next few months and years – but there will also be clear winners. Winners who embrace the opportunity of change, and supply chains that support their customers to deliver this change.